VOOPOO VMATE PRO 2

ECO and POWER: two modes for different ways of vaping

The VMATE PRO 2 lets you switch between energy-saving automatic mode and custom power settings. The GENE AI 2.0 chipset controls the heating.

• ECO: intelligently adjusts the power according to the pod’s resistance and your vaping style. It helps reduce energy and e-liquid consumption without the need for manual adjustments.
• POWER: lets you manually set the power according to the pod you’re using and your preferred intensity, up to a maximum of 30 W.

Switch between modes using the switch on the device body. In both modes, heating is activated automatically when you inhale. ECO mode doesn’t simply impose a fixed power limit; it continuously adjusts the output to your vaping style.

1500 mAh battery and fast USB-C charging

The integrated 1500 mAh battery is a significant upgrade over the original VMATE PRO, which had a 900 mAh battery. It provides power for both tighter MTL and more powerful RDL vaping.

USB-C charging supports 5 V / 2 A. The manufacturer states that a full charge takes approximately 40 minutes when using a suitable power source. In ECO mode, it claims up to 20% longer battery life compared with typical use. Actual battery life depends on the pod selected and how often you vape.

OLED display and intuitive controls

The 0.54-inch OLED display on the side shows the set power, remaining battery capacity, pod resistance, puff count and puff duration. This lets you see key information at a glance instead of relying on a simple indicator light.

The display is complemented by a colored light ring on the bottom of the device. The control button and separate ECO/POWER switch let you change the settings, while heating itself remains automatic.

Stepless airflow adjustment for MTL and RDL

Use the slider to adjust the airflow independently of the selected mode. The VMATE PRO 2 lets you change both the draw resistance and heating intensity.

• MTL (mouth-to-lung): a tighter draw with less airflow and a 0.7-ohm pod.
• RDL (restricted direct-lung): more open airflow and a 0.4-ohm pod with a recommended power range of 18–30 W.

Two 2 ml pods included in the Czech package

The European package includes two refillable VMATE Top Fill Cartridges with integrated mesh coils. Both have a 2 ml capacity, but differ in resistance and draw characteristics.

• 0.4 ohm: recommended power range of 18–30 W, suitable for RDL.
• 0.7 ohm: recommended power range of 15–25 W, suitable for MTL.

The top-fill port under the silicone cap lets you refill the e-liquid without removing the pod from the device. The transparent body makes it easy to check the liquid level. Once the integrated coil wears out, the entire pod must be replaced.

Full compatibility with VMATE pods

The VMATE PRO 2 uses the VMATE Pod Family. It is compatible with different generations of pods with integrated coils, which vary in resistance and filling method.

• VOOPOO VMATE V3 Top Fill Cartridge 2 pcs – replacement refillable top-fill pods with resistances of 0.4 ohm for RDL and 0.7 ohm for MTL. Each has a 2 ml capacity.
• VOOPOO VMATE V2 Cartridge 2 pcs – an older generation with side filling and resistances of 0.7 or 1.2 ohm for MTL. Each pod has a 2 ml capacity.
• VMATE Top Fill Cartridge 1.0 ohm – a top-fill option for a tighter MTL draw.
• VMATE Cartridge V4 – a newer generation of the VMATE system with an integrated coil, available in resistances of 0.4, 0.7 and 1.0 ohm. The 2 ml capacity is intended for the Czech market.

PnP and PnP X coils cannot be inserted into these pods. ARGUS and VINCI systems use different accessories and are not interchangeable with the VMATE PRO 2.

Metal body, dimensions and safety protections

The slim metal body measures 103 × 28.5 × 15.5 mm and weighs 50 g according to the manufacturer. The various color options combine smooth and decoratively textured finishes, including CNC polishing and an optical laser pattern.

The electronics provide protection against short circuits, overcharging, low battery voltage, overheating and excessive output current. Continuous heating is limited to five seconds.

VMATE PRO 2 or VMATE MAX 2?

The VMATE PRO 2 is a good choice if you want a lightweight, slim metal device with an OLED display, adjustable power and ECO mode. If you prefer a larger battery and display, take a look at the VOOPOO VMATE MAX 2. It offers a 2100 mAh battery and a larger 0.85-inch display.

Specifications

• Brand: VOOPOO
• Model: VMATE PRO 2
• Type: refillable pod electronic cigarette
• Battery capacity: 1500 mAh
• Battery: integrated
• Output power: 5–30 W
• Power adjustment: automatic / manual
• Output voltage: 3.2–4.2 V
• Supported resistance: 0.4–3.0 ohm
• Chip: GENE AI 2.0
• Modes: ECO / POWER
• Display: OLED, 0.54 inches
• Activation: automatic upon inhaling
• Airflow adjustment: yes, stepless
• Compatible system: VMATE Pod Family
• Compatible pods: VMATE Top Fill, VMATE V2 and VMATE V4
• Pod capacity for CZ: 2 ml
• Resistance of included pods: 0.4 and 0.7 ohm
• Pod filling: top
• Coil type: integrated mesh
• Charging: USB-C, 5 V / 2 A
• Body material: metal
• Dimensions: 103 × 28.5 × 15.5 mm
• Weight: 50 g

Package contents – European TPD version

• 1× VOOPOO VMATE PRO 2 device
• 1× VMATE Top Fill Cartridge 0.4 ohm, 2 ml
• 1× VMATE Top Fill Cartridge 0.7 ohm, 2 ml
• 1× USB-C charging cable
• 1× user manual
• 1× VMATE Pod Family compatibility guide