Low stock
VOOPOO VINCI S is a refillable pod e-cigarette with a 2000 mAh battery, up to 40 W of power, and automatic power adjustment based on the cartridge used. It features adjustable airflow, draw-activated firing, and an LED battery status indicator. It supports VINCI S and VINCI E cartridges, as well as the VINCI PnP X system with replaceable coils. The included cartridge uses iCOSM CODE 2.0 technology.
View full description ↓VOOPOO VINCI S is a refillable pod e-cigarette with a 2000 mAh battery, up to 40 W of power, and automatic power adjustment based on the cartridge used. It features adjustable airflow, draw-activated firing, and an LED battery status indicator. It supports VINCI S and VINCI E cartridges, as well as the VINCI PnP X system with replaceable coils. The included cartridge uses iCOSM CODE 2.0 technology.
Couldn't load pickup availability
Product description
2000 mAh battery and output of up to 40 W
The VINCI S combines a built-in 2000 mAh battery with an output range of 5–40 W. The GENE.TT 2.0 chip automatically detects the resistance of the installed cartridge and adjusts the output accordingly. There’s no need to set the wattage or switch modes.
The manufacturer states that the battery lasts up to three days with heavier use and up to a week with fewer puffs. These are approximate figures. Actual battery life depends on the cartridge resistance, wattage and frequency of use.
The device charges via USB-C at 5 V / 1 A. Its electronics also regulate the output to keep flavour consistent as the battery gradually discharges.
Automatic operation, LED indicator and airflow adjustment
The VINCI S has no display or buttons for adjusting the output. Firing is activated automatically by inhaling. An LED indicator shows the battery status.
There is a sliding airflow control on the body that lets you adjust the draw. Combined with the cartridge resistance, this gives you two main options:
- MTL (mouth-to-lung): a tighter draw with higher resistance, such as 0.8 or 1.0 ohm.
- RDL (looser restricted direct-lung): an airier draw with a resistance of 0.6, 0.45 or 0.3 ohm and a corresponding automatically set output.
VINCI S cartridges and iCOSM CODE 2.0 technology
The European package includes a 2 ml VINCI S cartridge with an integrated 0.8 ohm mesh coil.
iCOSM CODE 2.0 technology combines an improved e-liquid supply to the coil with several design features:
- Mega-Core: a coil design intended to vaporise e-liquid evenly.
- Golden Cotton: an absorbent material designed to provide a steady supply to the coil.
- Liquid-Seal Shield: a solution designed to reduce leaking and condensation build-up.
The manufacturer states that the coil can last for up to 100 ml of e-liquid. This is the maximum stated figure; actual lifespan depends on the e-liquid composition and how the device is used.
The cartridge is filled through a top-side port beneath a silicone cover, without needing to remove it from the device. As the coil is integrated, you replace the entire cartridge when it wears out.
Full compatibility with cartridges and coils
The VOOPOO VINCI S supports several types of accessories. You can use ready-made cartridges with integrated coils or switch to the VINCI PnP X system, where coils are replaced separately.
- VOOPOO VINCI S Cartridge 2 pcs – original replacement cartridges featuring iCOSM CODE 2.0 technology. The 0.8 ohm resistance is suitable for MTL, while 0.6 ohm is suitable for a looser MTL to RDL draw. The European version has a capacity of 2 ml.
- VOOPOO VINCI E Cartridge – compatible cartridges with integrated coils, available in 0.3, 0.6 and 0.8 ohm resistances. They differ in draw style and recommended output.
- VINCI PnP X Cartridge MTL, 2 ml – an empty refillable cartridge designed for separately replaceable PnP X coils and a tighter draw.
- VINCI PnP X Cartridge DTL, 2 ml – an empty cartridge for a looser draw. With the VINCI S, it can only be used with resistances supported by its maximum output of 40 W.
- VOOPOO PnP X coil – separate replaceable mesh coils for compatible VINCI PnP X cartridges. With the VINCI S, you can use 0.3, 0.45, 0.6, 0.8 and 1.0 ohm resistances.
Recommended wattages for compatible PnP X coils
- 0.3 ohm: 32–40 W, RDL
- 0.45 ohm: 25–32 W, RDL
- 0.6 ohm: 18–23 W, MTL / RDL
- 0.8 ohm: 12–16 W, MTL
- 1.0 ohm: 10–13 W, MTL
Important: The VINCI S does not support resistances below 0.3 ohm. PnP X 0.15 and 0.2 ohm coils are therefore not suitable for this device. PnP X replaceable coils also require the appropriate empty VINCI PnP X cartridge. They cannot be inserted into a VINCI S cartridge with an integrated coil.
Design, dimensions and safety features
The VINCI S has a body made of aluminium alloy and polycarbonate. It weighs approximately 69 g and measures 106.2 × 30.2 × 21.3 mm.
The colour options feature a Luminous Palette finish. In addition to solid colours, gradient options are also available.
The electronics include protection against short circuits, overcharging, overcurrent, low battery voltage and overheating. Continuous firing is limited to eight seconds.
Specifications
- Brand: VOOPOO
- Model: VINCI S
- Type: refillable POD e-cigarette
- Battery capacity: 2000 mAh
- Battery: built-in
- Output power: 5–40 W
- Output adjustment: automatic
- Output voltage: 3.3–4.35 V
- Supported resistance: 0.3–3.0 ohm
- Chip: GENE.TT 2.0
- Activation: automatic, by inhaling
- Indicator: LED
- Airflow adjustment: yes, continuous
- Compatible cartridges: VINCI S, VINCI E, VINCI PnP X MTL / DTL
- Compatible replaceable coils: PnP X, from 0.3 to 1.0 ohm
- Technology of included cartridge: iCOSM CODE 2.0
- Cartridge capacity for CZ: 2 ml
- Filling method for included cartridge: top-side
- Resistance of included cartridge: 0.8 ohm
- Charging: USB-C, 5 V / 1 A
- Material: aluminium alloy and polycarbonate
- Dimensions: 106.2 × 30.2 × 21.3 mm
- Weight: approximately 69 g
Package contents – European TPD version
- 1× VOOPOO VINCI S device
- 1× VINCI S Cartridge, 0.8 ohm, 2 ml
- 1× user manual